Publications

1. S. Mehmood R. Amin J. Mustafa M. Hussain F.S. Alsubaei and M.D. Zakaria (2025) Distributed denial of service (DDoS) attack detection in SDN using optimizer-equipped CNN-MLP. PLOS ONE.
2. R. Alazaidah M.S. Al-Batah G. Samara M. Alluwaici M.A. Safaqah M. Aljaidi S.I. Mohammad A. Vasudevan and Y. Zhang (2025) Prediction of landslides using data mining techniques. Applied Mathematics and Information Sciences. 19(2) pp. 437-447.
3. M. Zahrapanah Razaviyn M. Heidari S. Thangavel V. Verma A. Kumar and A.K. Yadav (2025) Marine energy harvesting from fluid flow via vortex-induced vibrations. International Journal of Thermofluids. 25 p. 101015.
4. Y.H. Gangadharaiah K.R. Rashmi N. Jeyaprakash C. Durga Prasad A. Tiwari S.B. Karthik S. Bavan and A.A. Aden (2025) Influence of induced magnetic field and gravity fluctuations on the onset of double-diffusive penetrative convection in porous media with throughflow. International Journal of Thermofluids. 26 p. 101051.
5. K.M. Al Manji M. Hussain and M. Hussain (2024) Artificial Intelligence in Oman’s government schools: A comprehensive study of its adoption and impact on teachers and students at secondary level. International Journal of Research and Scientific Innovation. 11(12) pp. 3-10.
6. M. Mokhtari S. Jamei Z. Razaviyan M. Heidari S. Thangavel and A. Kumar (2024) Numerical and hydrodynamic analysis of a container vessel due to the change of collision wave angle at different speeds in regular wave. Journal of Mechanical Engineering and Sciences. 18(4) pp. 10247-10260.
7. A.I. Darbandi A. Akbari M. Nadafan and M. Khashehchi (2024) A remarkable third-order nonlinear-optical behaviour of fennel bioresources. Optics & Laser Technology. 179 p. 111271.
8. H.A. Butt K.S. Al Harthy M.A. Shah M. Hussain R. Amin and M.U. Rehman (2024) Enhanced DDoS Detection Using Advanced Machine Learning and Ensemble Techniques in Software Defined Networking. Computers, Materials & Continua. 81(2) pp. 3003–3031.
9. I. Al Balushi and M. Hussain (2024) Advanced-data analytics for water loss management and leakage detection using machine learning models: A case study of Al Seeb area, Khoudh Six. International Journal of Research in Science and Innovation. pp. 43-54.
10. M.U. Ali S.J. Hussain M. Khalid M. Farrash H.F.M. Lahza and A. Zafar (2024) MRI-driven Alzheimer’s disease diagnosis using deep network fusion and optimal selection of feature. Bioengineering. 11 p. 1076.
11. A. Al Siyabi and J. Sivakumar (2024) Predicting employee performance in the government of Oman using machine learning. Journal of Data Acquisition and Processing. 39(2) pp. 1–10.

1. Khani Aminjan K. Escobedo-Diaz J.P. Heidari M. Rahmanivahid P. Khashehchi M. Marami Milani S. and Salahinezhad M. (2023) Comment on “DPM-LES investigation on flow field dynamic and acoustic characteristics of a twin-fluid nozzle by multi-field coupling method”. International Journal of Heat and Mass Transfer [online]. 217 p. 124678. [Accessed 23 June ,2024].

2. Ipadeola A.K. Abdelgawad A. Salah B. Ghanem A. Chitt M. Abdullah A.M. and Eid K. (2023) Self-standing foam-like Pd-based alloys nanostructures for efficient electrocatalytic ethanol oxidation. International Journal of Hydrogen Energy [online]. 48 (78) pp. 30354–30364. [Accessed 23 June ,2024].

3. Senthilraja S. Gangadevi R. Köten H. Thangavel S. Baskaran M. and Awad M.M. (2023) Energy analysis of solar powered hydrogen production system with CuO/water nanofluids: An experimental investigation. Journal of King Saud University – Engineering Sciences [online]. 35 (8) pp. 525–530. [Accessed 23 June ,2024].

4. Nadafan M. Tavakoli B. Kabir N. Shadrokh Z. Khashehchi M. Abbasi A. and Abdi Y. (2024b) Morphology-dependent optical properties of a 3D CH3NH3PbBr3 based metal − organic framework. Optics & Laser Technology [online]. 169 p. 110104. [Accessed 23 June ,2024].

5. Verma V. Meena C.S. Thangavel S. Kumar A. Choudhary T. and Dwivedi G. (2023) Ground and solar assisted heat pump systems for space heating and cooling applications in the northern region of India – A study on energy and CO2 saving potential. Sustainable Energy Technologies and Assessments [online]. 59 p. 103405. [Accessed 23 June ,2024].

6. Nadafan M. Majidi R. Khashehchi M. Shahram S. Safdari M. and Dehghani Z. (2023) The Comparative Third-Order Nonlinearities of Titanium Carbide and Tungsten Carbide in the Visible Regain. Crystal Research and Technology. 58 (12) p. 2300220.

7. Nadafan M. Ghalkhani M. Ghanbari M. and Khashehchi M. (2024a) Third-order nonlinear optical treatment of (Ni and Fe)-doped zeolitic imidazolate framework-67: Synthesize and characterization. Journal of Molecular Structure [online]. 1301 p. 137280. [Accessed 23 June ,2024].

8. Nadafan M. Majidi R. Khashehchi M. Shahram S. Safdari M. and Dehghani Z. (2023) The Comparative Third-Order Nonlinearities of Titanium Carbide and Tungsten Carbide in the Visible Regain. Crystal Research and Technology. 58 (12) p. 2300220.

1. Saurav Sikarwar T. Sivasakthivel Ashok Y. Rajesh K. Vikas V. and Nitesh D. (2023) Lithium-Ion Battery Thermal Management Systems with Different Mediums and Techniques for Electric-Driven Vehicles. Thermal Energy Systems. pp. 219–230.

2. Salleh R. Ali K.K. Kumar V. Razak S.N.A. and Khan M.L. (2023) Perceived Organizational Support and Talent Retention of Women Engineers in the Malaysian Oil and Gas Sector: A Conceptual Framework. Journal of Hunan University Natural Sciences [online]. 50 (1) pp. 186–197.

3. Sahahd H. Heidari M. Ahmadizadeh. Mohammad Dashtizadeh M. and Chitt M. (2023) Modification of Horizontal Wind Turbine Blade: A Finite Element Analysis. International Journal of Technology. 14 (1) pp. 5–14.

4. Abdelgawad A. Eid K. Salah B. Lu Q. M. Abdullah A. Chitt M. Ghanem A. and Al-Hajri f R.S. (2023) Template-free synthesis of M/g-C3N4 (M= Cu Mn and Fe) porous one-dimensional nanostructures for green hydrogen production. Journal of Electroanalytical Chemistry. 938 p. 117426.

5. K. Ipadeola A. M. Abdullah A. Chitt M. Abdelgawad A. and Eid K. (2023) Graphene-based catalysts for carbon monoxide oxidation: Experimental and theoretical insights. International Journal of Hydrogen Energy.

6. Khan M.L. Salleh R. Javaid M.U. Arshad M.Z. Saleem M.S. and Younas S. (2023) Managing Butterfly Career Attitudes: The Moderating Interplay of Organisational Career Management. Sustainability (Switzerland) [online]. 15 (6).

7. Aminjan K.K. Juan Pablo E.-D. Heidari M. Ghodrat M. Rahmanivahid P. Naghdi Khanachahm S. and Chitt M. (2023b) Numerical and experimental investigation to design a novel morphing airfoil for performance optimization. Propulsion and Power Research. 12 (1) pp. 83–103.

8. Muhammad Latif Khan Mohamad A.H. Amjad S. and Rohani S. (2023) Role-play of employees’ protean career and career success in affective organizational commitment. Asia-Pacific Journal of Business Administration.

9. T. Sivasakthivel Rajesh K. Rahul T. Chandan S.M. Varun P.S. and Vikas V. (2023) Analysis of Optimum Operating Parameters for Ground Source Heat Pump System for Different Cases of Building Heating and Cooling Mode Operations. Thermal Energy Systems. (1) pp. 183–218.

10. Aminjan K.K. Abdullaev S.S. Ghodrat M. Heidari M. Arjmandfard A. Rahmanivahid P. Cosme Pecho R.D. and Yasin Y. (2023a) Study on duplex air-blast atomizers spray in the engine real operation conditions. Physics of Fluids. 35 (7).

11. Panjaitan M.B. Vaid Kwatra C. Sivakumar J. Chabra A. James M. and Kaur H. (2023) Intrusion detection system based on machine learning models: An empirical analysis. AIP Conference Proceedings.

12. Ali M.U. Hussain S.J. Zafar A. Bhutta M.R. and Lee S.W. (2023) WBM-DLNets: Wrapper-Based Metaheuristic Deep Learning Networks Feature Optimization for Enhancing Brain Tumor Detection. Bioengineering [online]. 10 (4).

13. Zafar A. Hussain S.J. Ali M.U. and Lee S.W. (2023) Metaheuristic Optimization-Based Feature Selection for Imagery and Arithmetic Tasks: An fNIRS Study. Sensors [online]. 23 (7).

14. Sivakumar J. and Nayak S. (2023) AN APPROACH ON BIG DATA FOR SENTIMENTAL ANALYSIS APPLICATIONS. European Chemical Bulletin . 12 (6) pp. 1347–1350.

15. Harun Z. Almutairi Y. Molla A.H. Sitinjak C. Khashehchi M. Mohamad T.I. and Reda E. (2023) End-of-Life Vehicles Initiatives in the Middle East. International Journal of Integrated Engineering [online]. 15 (4) pp. 51–63.

16. M. Nadafan S. Shahram J. Zamir Anvari and M. Khashehchi (2023) Thermal and optical characterization of a resistance-temperature detector based on platinum thin film: Design and fabrication. Optik. 290 p. 171349.

1. Shaik Asif Hussain Shaik Javeed Hussain Raza Hasan and Salman Mahmood ( 2021) Low-cost voice based braille script communication for teaching aid. Journal of Communications. 16 (10) pp. 457–467.

2. Masud M. Al Kharusi M.S.M. Ali M.U. Mubashar A. Hussain S.J. Tariq A. Rehman G.U. Akhtar M.H. and Javeed S. ( 2021) Prediction of the ultimate strength of notched and unnotched im7/977-3 laminated composites using a micromechanics approach. Polymers [online]. 13 (20).

3. Rahmani A.M. Naqvi R.A. Malik M.H. Malik T.S. Sadrishojaei M. Hosseinzadeh M. and Al-Musawi A. ( 2021) E-learning development based on internet of things and blockchain technology during covid-19 pandemic. Mathematics [online]. 9 (24).

4. Sarker K.U. Deraman A. Bin Hasan R. and Abbas A. (2022) A 4-Layered Plan-Driven Model (4LPdM) to Improve Software Development. International Journal of Advanced Computer Science and Applications [online]. 13 (8) pp. 589–600.

5. Hussain Malik M. and Professor Geoffrey E. (2022) A Roadmap to overcoming the Challenges of Cyber Security and Forensics Education in the age of distance learning and the COVID-19 pandemic. Journal of The Colloquium for Information Systems Security Education [online]. 9 (1). Available from: www.cisse.info.

6. Rahmani A.M. Ali S. Malik M.H. Yousefpoor E. Yousefpoor M.S. Mousavi A. khan F. and Hosseinzadeh M. (2022) An energy-aware and Q-learning-based area coverage for oil pipeline monitoring systems using sensors and Internet of Things. Scientific Reports [online]. 12 (1).

7. Hasan R. Anood A. Zahran S. Shamsi A. Hussain S. and Jesrani K. (2022a) Mobile Application for Order Management at Oman Cables Company [online]. Available from: https://www.researchgate.net/publication/361984170.

8. Hasan R. Mohammed A. Al Maskari H. Hussain S. Dattana V. and Rajegowda P.M. (2022b) The smart meters inventory control system for Mazoon Electricity Company [online]. Available from: https://www.researchgate.net/publication/361984183.

9. Hasan R. Mohammed S. Al Hamoodah A. Hussain S. Dattana V. and Jesrani K. (2022c) Design and Implementation of Mawhiba Mobile App [online]. Available from: https://www.researchgate.net/publication/361984188.

10. Jeong H. Lee S.W. Hussain Malik M. Yousefpoor E. Yousefpoor M.S. Ahmed O.H. Hosseinzadeh M. and Mosavi A. (2022) SecAODV: A Secure Healthcare Routing Scheme Based on Hybrid Cryptography in Wireless Body Sensor Networks. Frontiers in Medicine [online]. 9.

11. Arbaiah Inn Rosilah Hassan Mohamad Haziq Mohamad Sabri Amjed Sid Ahmed Mohamed and Anwar Hassan Ibrahim ( 2021) Analyzing Data Transfer Rate Movement for Visible Light Communication. Muscat Oman: IEEE Explore.

12. Asam M. Hussain S.J. Mohatram M. Khan S.H. Jamal T. Zafar A. Khan A. Ali M.U. and Zahoora U. ( 2021) Detection of exceptional malware variants using deep boosted feature spaces and machine learning. Applied Sciences (Switzerland) [online]. 11 (21).

13. Masud M. Al Kharusi M.S.M. Ali M.U. Mubashar A. Hussain S.J. Tariq A. Rehman G.U. Akhtar M.H. and Javeed S. ( 2021) Prediction of the ultimate strength of notched and unnotched im7/977-3 laminated composites using a micromechanics approach. Polymers [online]. 13 (20).

14. Ahmed W. Ali M.U. Hussain S.J. Zafar A. and Hasani S. Al (2022) Visual Vocabulary Based Photovoltaic Health Monitoring System Using Infrared Thermography. IEEE Access [online]. 10 pp. 14409–14417.

15. Alanazi M.F. et al. (2022) Brain Tumor/Mass Classification Framework Using Magnetic‐Resonance‐Imaging‐Based Isolated and Developed Transfer Deep‐Learning Model. Sensors [online]. 22 (1).

16. Rahmanivahid P. and Heidari M. (2022) Design parameters of dental implants: A review. Revista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieria [online]. 38 (1).

17. Taleb Moazzeni Sulaiman Abdullah Al Hasani Muhammad Irfan Memon and S. Javeed Hussaini (2022) On the Effect of Compactness of Pulse Shaping Function on Inter-Symbol Interference. IEEE. 26 (4) pp. 828–832.

18. Khan M.L. Kamran H. Ruksana Banu A. Ugheoke S.O. and Qureshi A. (2022) The Effect of HR Practices on Job Satisfaction in the Banking Sector of Pakistan. The Practical Implication from Long-term and Short-term Perspectives – COVID-19. Economic Alternatives [online]. 28 (2) pp. 280–297.

19. Vikas verma Rahul T. Thangavel S. and Nath R. (2022) Thermal performance of water-based brines as a heat carrier for ground heat exchanger under severely cold environments. Wiley Library. 51 (8) pp. 7233–7249.

20. Heidari M. Escobedo-diaz J.P. Ghodrat M. and Aminjan K.K. (2022) Study on Inlet Pressure and Reynolds Number in Pressure Swirl Atomizer with Spiral Path . International Communications in Heat and Mass Transfer. 137 pp. 3–4.

21. Masud M. Al Kharusi M.S.M. Ali M.U. Mubashar A. Hussain S.J. Tariq A. Rehman G.U. Akhtar M.H. and Javeed S. ( 2021) Prediction of the ultimate strength of notched and unnotched im7/977-3 laminated composites using a micromechanics approach. Polymers [online]. 13 (20).

22. Asam M. Hussain S.J. Mohatram M. Khan S.H. Jamal T. Zafar A. Khan A. Ali M.U. and Zahoora U. ( 2021) Detection of exceptional malware variants using deep boosted feature spaces and machine learning. Applied Sciences (Switzerland) [online]. 11 (21).

23. Shaik Asif Hussain Shaik Javeed Hussain Raza Hasan and Salman Mahmood ( 2021) Low-cost voice based braille script communication for teaching aid. Journal of Communications. 16 (10) pp. 457–467.

24. Ipadeola A.K. Lebechi A.K. Gaolatlhe L. Haruna A.B. Chitt M. Eid K. Abdullah A.M. and Ozoemena K.I. (2022) Porous high-entropy alloys as efficient electrocatalysts for water-splitting reactions. Electrochemistry Communications [online]. 136.

25. Rahmanivahid P. and Heidari M. (2022) Design parameters of dental implants: A review. Revista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieria [online]. 38 (1).

26. Taleb Moazzeni Sulaiman Abdullah Al Hasani Muhammad Irfan Memon and S. Javeed Hussaini (2022) On the Effect of Compactness of Pulse Shaping Function on Inter-Symbol Interference. IEEE. 26 (4) pp. 828–832.

27. Tian Z. Tang C. Akram F. Khan M.L. and Chuadhry M.A. (2022) Negative Work Attitudes and Task Performance: Mediating Role of Knowledge Hiding and Moderating Role of Servant Leadership. Frontiers in Psychology [online]. 13.

28. K. Salari M. Khashehchi E. Pipelzadeh P. Zarafshan and Gh. Chegini (2022) Modeling and predicting of water production by capacitive deionization method using artificial neural networks. Science Direct. 540.

29. Ding F. Liu X. Abdalla A.A. and Khan L.M. (2022) Corrigendum: The link between English foreign language teacher’s professional identity and their critical thinking that leads to teacher’s success in the Chinese context: Leaders motivational language as a moderator.

30. Khani Aminjan K. Heidari M. and Rahmanivahid P. ( 2021) Study of spiral path angle in pressure-swirl atomizer with spiral path. Archive of Applied Mechanics [online]. 91 (1) pp. 33–46.

31. Hussain Malik M. Ahmed A.S. and Hosseini A. (no date) 2. Computer Aided Collaborative Learning: Challenges and Opportunities.

32. Saikia S. Verma V. Kakati B.K. Sivasakthivel T. and Tarodiya R. ( 2021) Optimization of solar integrated electrolyser system for hydrogen production using Taguchi method. In: Materials Today: Proceedings [online]. 49 Elsevier Ltd pp. 397–402.

1. Ahmed, A.S., Hassan, R., Qamar, F., and Malik, M. (2021) Ipv6 cryptographically generated address: analysis, optimization and protection.  Computers, Materials & Continua. 68 (1), pp. 247–265. (Available Online)
2. Malik, M.H., Amjed, S.A., and Al Hasani, S. (2021) Covid-19 and learning styles: GCET as case study. Computers, Materials & Continua 68(1), pp. 103–115. (Available online)
3. Razaviyan, Z., Heidari, M., Talebbeigi, F. and Rahmanivahid P. (2021) Numerical study of vortex shedding suppression using confined cylinder. Asia-Pacific Journal of Science and Technology. 24(1), pp. 1-8. (Available online)
4. Saikia, S., Verma, V., Kakati, B.K. Thangavel, S. & Tarodiya, R. (2021) Optimization of solar integrated electrolyser system for hydrogen production using Taguchi method. Materials Today Proceedings. (Available online)
5. Tarodiya, R., Verma, V., & Thangavel S. (2021) A study on utilization of ground source energy for space heating using a nanofluid as a heat carrier. Heat Transfer. 1-19. (Available online)
6. Talukdar, M.I., Hassan, R., Hossen, M.S., Ahmad, K., Qamar, F. and Ahmed, A.S. (2021) Performance Improvements of AODV by Black Hole Attack Detection Using IDS and Digital Signature. Wireless Communications and Mobile Computing. (Available Online)

1. Aminjan, K.K., Rahmanivahid, P. & Heidari, M. (2020) Effects of Thermodynamic Parameters on Performance of Gas Turbine Cycle with Regenerator. International Journal of Mechanical and Production Engineering Research Development. 10 (3), pp. 7955-7964. (Available online)
2. Aminjan, K.K., Heidari, M.& Rahmanivahid, P. (2020) Study of spiral path angle in pressure- swirl atomizer with spiral path. Archive of Applied Mechanics. (Available online)
3. Abuhmaidan, K. & Nagy, B. (2020) Bijective, Non-Bijective and Semi-Bijective translations on the triangular plane. Mathematics Open Access Journal. (Available online)
4. El-Taj, H.R. & Alhadrami, R. (2020) CryptoQR System based on RSA. International Journal of Computer Science and Information Security. 18 (6), pp. 13-19. (Available online)
5. Hassan, R., Qamar, F., Hasan, M.K. Aman,A.H.M.,& Ahmed, A.S. (2020) Internet of things and its applications: a comprehensive survey. Symmetry and IoT Intelligence in the Post Pandemic Economy. 12 (10), pp.1674. (Available Online)
6. Hussain, S.A., Al Ghawi, S., Al Rawahi, B. & Hussain, S.J. (2020) Design and implementation of indoor environment monitoring and controlling system. International Journal of Advanced Science and Technology. 29 (3), pp. 8-14. (Available online)
7. Hussain, S.A., Hasan, R., Mahmood, S. & Hussain, S.J. (2020) Design of wireless robotic system for rescue operation in hazardous environment. International Journal of Mechanical Engineering and Robotics. 9 (2), pp. 299-304. (Available online)
8. Hussain, S.J., Khan, S., Hasan, R. & Hussain, S.A. (2020) Design and implementation of animal activity monitoring system using TI Sensor Tag. Springer Singapore. pp. 167-175. (Available online)
9. Heidari, M., Rahmanivahid, P., Sharifi, S.N.A., Hashemi, M., Mohammadian, E., Akbari, A. & Razaviyan, Z. (2020) Effect of elbow implant design parameters on loosening: A finite element analysis. International Journal of Numerical Methods for Calculation and Design Engineering. (Available online)
10. Heidari, M. & Rahmanivahid, P. (2020) Effect of Linkage design of an elbow implant on micro-motion: a finite element analysis. International Journal of Engineering & Technology. (Available online)
11. Kenesh, Y., Abdalla, A.G. & Hussain J. (2020) Barriers effects & a secure system for payments over mobile in Sudan. International Journal of Recent Technology and Engineering. 9 (1), pp. 2634-2639. (Available online)
12. Moazzeni, T., Memon, M.I. & Al Hasani, S. (2020) On the connection between compactness of shaping function and ISI. IEEE Communication Letters. (Available online)
13. Malik, M.H. & Rafi, M.A. (2020) Analysis of network security using cryptography. Scientific International. 32(3), pp. 285-289. (Available online)
14. Rahmanivahid, P. & Heidari, M. (2020) Effect of design parameters of dental implant on stress distribution: a finite element analysis. International Journal of Engineering & Technology. (Available online)
15. Rafi, M.A., Malik, M.H. & Javed, M.I. (2020) Health care using wireless body area networks. Scientific International. 32 (3), pp. 317-322. (Available online)
16. Souri, A., Mohammed, A.S., Potrus, M.Y., Malik, M.H., Safara, F. & Hosseinzadeh, M. (2020) Formal verification of a hybrid machine learning-based fault prediction model in Internet of Things applications. IEEE Access. 8, pp. 23863 – 23874. (Available online)
17. Suganeswaran, K., Parameshwaran, R., Thangavel P., Nithyavathy, N. & Sivasakthivel T. (2019) Investigations on micro hardness, electrical and thermal conductivity of AA7075 surface hybrid composites produced through friction stir processing. Material Research Express. 6 (2019). (Available online)
18. Heidari, M., Rahmanivahid, P., Yusof, F., & Kashani, J. (2020) Design and fabrication of drill guide template for total elbow arthroplasty. International Journal of Numerical Methods for Calculation and Design Engineering. (Available online)

1. Al-Kharusi S.M Alzebdeh K. and Pervez T. (2018) Evaluation of Young’s Modulus of Single Walled Carbon Nanotube using finite element analysis technique.

2. Ahmed A.S. Hassan R. Othman N.E. Ahmad N.I. and Kenish Y. (2019) Impacts evaluation of DoS attacks over IPv6 neighbor discovery protocol. Journal of Computer Science [online]. 15 (5) pp. 702–727.

3. Rajaaal H. Farh A. and Al Hasani S. (2019) Image Processing Based Automatic Color Object Sorting Using PLC System International Journal of Electrical and Electronics Research [online]. 7. Available from: www.researchpublish.com.

4. Al-Badri R. and Al Hasani S. (2019) CLASS ATTENDANCE RECORD BASED FACE RECOGNITION USING RASPBERRY PI [online]. Available from: www.globalscientificjournal.com.

5. Saadi F. Al Al Jabri M. and Hasani S. Al (2019) Integrated Accident Detection & Reporting System [online]. Available from: www.globalscientificjournal.com.

6. El-Hassan N.H. Almurib H.A.F. and Nandha Kumar T. (2019) Phase change memory: electrical circuit modelling nanocrossbar performance analysis and applications. 2 IET Digital Library.

7. Furusawa Y. Taguchi H. Ismail S.N. Thangavel S. Matsuoka K. and Fushimi C. (2019) Estimation of cold gas efficiency and reactor size of low-temperature gasifier for advanced-integrated coal gasification combined cycle systems. Fuel Processing Technology [online]. 193 pp. 304–316.

8. Khalid A. and Memon I. (2019) Bluetooth based Traffic Tracking System. International Research Journal of Engineering and Technology [online]. Available from: www.irjet.net.

9. Al-Muhaidhri G. and Hussain J. (no date) Smart Attendance System using Face Recognition [online]. Available from: www.ijert.org.

1. S.Asif H. Hussain Javeed.S.Dr. and Mohammed H. (2017) Detection of brain activity with an automated system hardware for accurate diagnostic of mental disorders. Association for Computing Machinery pp. 1–6.

2. Asif Hussain S. Hasan R. and Javeed Hussain S. (2018) Classification and Detection of Plant Disease using Feature Extraction Methods International Journal of Applied Engineering Research [online]. 13 (6). Available from: http://www.ripublication.com.

3. Hasnain M. Malik M.H. and Aydin M.E. (2018) An adaptive opportunistic routing scheme for reliable data delivery in WSNs. In: ACM International Conference Proceeding Series [online]. Association for Computing Machinery.

4. Ishaq M. Hussain Malik M. and Aydin M.E. (2018) Managing Congestion in Vehicular Networks Using Tabu Search.

5. Hussain S.A. Hussain S.J. and Ramaiah C. (2018) A Hardware Model to Measure Motion Estimation with Bit Plane Matching Algorithm. TELKOMNIKA (Telecommunication Computing Electronics and Control). 16 (5).

6. Yasir S.M. Khan M.S. Wahid A. Mushtaq M.T. Memon M.I. Siraj M. and Iqbal M.S. (2018) Performance of free space optical terrestrial link under dense fog conditions. In: Acta Physica Polonica A [online]. 134 (1) Polish Academy of Sciences pp. 268–270.

7. Al Zaabi K. and Hussain J. (2019) Design and Implementation of Flow Meter Maintenance Robot for Oil & Gas Industries [online]. Available from: www.ijert.org.

1. Al-Mamari, I., Al Ruhaili, S., Al Naamani, E., and Heidari, M., 2024, December. Insight into Future Directions for the Utilization of Green Hydrogen in Oman. In 2nd GCC International Conference on Industrial Engineering and Operations Management, https://doi.org/10.46254/GC02.20240045.
2. Al Ajmi, M., Anwar, K., and Azimin, M., 2024, December. Renewable Energy Transition In Remote Islands: Evaluating The Potential For Al Hallaniyat Island. In 2nd GCC International Conference on Industrial Engineering and Operations Management, https://doi.org/10.46254/GC02.20240096.
3. Al Saadi, K. and Al Harthy, K., eds. (2024) Evaluating Students’ Perceptions of Using Generative AI Tools in HEIs in Oman [online]. 7th International Conference on Recent Trends in Multi-Disciplinary Research, Istanbul, 11-18 November 2024. Available from: https://cdn.iferp.in/conf-proceedings/2024/november/7th-ICRTMDR-2024-Istanbul-Conference-Proceedings.pdf
4. Al Rumhi M., Heidari M., and Al Namaani E. (2024) Optimizing Engineering Management Strategies for Construction Projects in PDO: A Comprehensive Analysis of Project Constraints and Performance Factors. 2nd GCC International Conference on Industrial Engineering and Operations Managemen, Muscat, Oman, December 1-3, 2024– Sultan Qabus University https://doi.org/10.46254/GC02.20240038
5. Al hajri M., Heidari M., Al Abri A. (2024) Modal Analysis of Horizontal Axis Wind Turbine, 2nd GCC International Conference on Industrial Engineering and Operations Management, Muscat, Oman, December 1-3, 2024– Sultan Qabus University
6. Al Haddabi, S., and Chitt, M., 2025, February. The Importance of Quality Control and Inspection in the Oil and Gas Sector. In 15th Annual International Conference on Industrial Engineering and Operations Management, https://doi.org/10.46254/AN15.20250550.
7. Ashfaq, F., Ahad, A., Hussain, M. & Madeira, F. (2024) ‘Transforming diabetes care: A review of IoT-based mobile health systems’, in: Ferraro, V., Covarrubias, M., Zdravevski, E., Pires, I.M., Marques Martins de Almeida, J.M. & Gonçalves, N.J. (eds.) IoT Technologies and Wearables for Healthcare: HealthyIoT ICWH 2023, Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol. 530, Springer, Cham. Available at: https://doi.org/10.1007/978-3-031-71911-0_2
8. Balbin, A.L., Tabañag, I.D.F., Lozano, J.D. (2024) Metal Accumulation of Plants in a Nickel Laterite Mine and Their Phytoremediation and Phytomining Potential, International Exchange and Innovation Conference on Engineering and Sciences, 10, pp. 499–505. Fukuoka, 17–18 October 2024. Available at: https://doi.org/10.5109/7323307

1. Al-Kindi, S., Al-Hadhrami, S. and Al-Kalbani, M. (2024) ‘Assessment of air quality using personal exposure sensors during the 2023 Dhofar monsoons period’, in Proceedings of the 10th World Congress on New Technologies (NewTech’24), Barcelona, Spain, 25–27 August, Paper No. ICEPR 163. Available at: https://doi.org/10.11159/icepr24.163
2. Mishra, M., Parameswari, S., Ramachandran, K., Ashok, P., Kumar, S.N. and Kannadhasan, S. (2024) ‘Teacher education for quality enhancement in the age of globalisation in developing countries’, Proceedings of the 9th International Congress on Information and Communication Technology (ICICT 2024) [online]. London, 19-22 February 2024. Springer. Available at: https://doi.org/10.1007/978-981-97-3305-7_25
3. Rajasekaran, A.S., Priya, S.S., Sivakumar, J., Varkale, A. and R., R. (2023) ‘Cybersecurity measures using machine learning for business applications’, 2023 4th International Conference on Computation, Automation and Knowledge Management (ICCAKM), Dubai, United Arab Emirates, pp. 1–8. Available at: https://doi.org/10.1109/ICCAKM58659.2023.10449580
4. Farh, A.F.A. and Bilal, K.H. (2023) ‘Design and implementation of a jamming system for smartphones using a cognitive radio network’, in Proceedings of the 24th International Arab Conference on Information Technology (ACIT), Ajman, United Arab Emirates, pp. 1–7. Available at: https://doi.org/10.1109/ACIT58888.2023.10453779
5. Saif Al Ghusaini, Q.A.-Q. and Moazzeni, T. (2023) ‘Pulse shaping filters: Finding the sweet spot for SNR and compactness’, in Proceedings of the 24th International Arab Conference on Information Technology (ACIT), Ajman, United Arab Emirates, pp. 1–6. Available at: https://doi.org/10.1109/ACIT58888.2023.10453791
6. Al Rumhi, S. and Sivakumar, J. (2023) ‘Sales analysis – review and recommendations on business intelligence’, 2023 24th International Arab Conference on Information Technology (ACIT), Ajman, United Arab Emirates, 2023, pp. 1-10. doi: 10.1109/ACIT58888.2023.10453770.
7. Dhabliya, D., Alkkhayat, A.H., Sivakumar, J., Bhokde, R. and B., M. (2023) ‘Design and analysis of four-wheeler chassis for improved performance’, 2023 4th International Conference on Computation, Automation and Knowledge Management (ICCAKM), Dubai, United Arab Emirates, pp. 1–8. Available at: https://doi.org/10.1109/ICCAKM58659.2023.10449564
8. Ashraf, S.A., Rao, C.V., Khan, K., Mohatram, M., Ahmad, A., Jahan, S. and Ramya, C. (2024) ‘Strategic route for impending green hydrogen energy in Oman’, in Proceedings of the International Conference on Renewable Energy, Green Computing and Sustainable Development (ICREGCSD 2023), E3S Web of Conferences, 472, Article No. 01011, pp. 1–12. Available at: https://doi.org/10.1051/e3sconf/202447201011
9. Panjaitan, M.B., Sivakumar, J., Chabra, A., James, M., Kaur, H. and Kwatra, C.V. (2023) ‘Intrusion detection system based on machine learning models: An empirical analysis’, AIP Conference Proceedings, 2930 (1), 020040. doi: 10.1063/5.0180641
10. Ahmad, A., Mohatram, M. and Ashraf, S.A. (2023) ‘Computation of mean time to failure (MTTF) of resolvers for the use of different industrial processes’, in Proceedings of the 2nd International Conference on Scientific and Innovation Research. Sivas, Turkey, 15–17 September 2023, vol. 1, pp. 1122–1130. ISBN: 978-625-367-323-9.

1. Mohamed Abdou F.A. Memon M.I. and Shaik J.H. (2022) Senitimental Analysis of Behavoral Changes in the Society Due To Ramadan in Islamic World. Istanbul Turkey: IEEE pp. 1–5.

2. Saba M.J. Hassan Elhassan.Nemat and Moazzeni T. (2022) Improved Camera-Based Text Reading Assistant System Using Digital Image Processing Techniques. Arad Romania: IEEE IAS Global Conference on Emerging Technologies pp. 244–248.

3. Hasan R. Hussain S. Malik M.H. and Akhtar N. (2023) Group Work Assessment: Assessing Peer Assessment at Global College of Engineering and Technology. SHS Web of Conferences [online]. 156 p. 02001.

4. Mohsina M. Kanagaraj V. Akbar M. S. Kannadhasan Judice A. and S. Ganesh (2023) A Review Study of AI Enabled Computer Network. Tirunelveli India: IEEEICSSIT pp. 1250–1257.

1. Khan R.Y. Awais Q. Khan M.N. Zahid T. Mehboob K. Malik M.H. Jamil M. and Farasat M. (no date) Asia Pacific International Conference on Emerging Engineering (APICEE) held in RECTANGULAR ANTENNA WITH VERTICAL SLOTS IMPLEMENTED FOR WLAN APPLICATIONS. Pakistan Journal of Science. (4) pp. 103–105.

2. Memon I. and Khalid A. (2020) Bluetooth-Based Traffic Tracking System Using ESP32 Microcontroller. Singapore: Springer pp. 737–746.

1. Mohd Aman A.H. Raheem Al-Mayyah Z.A. Hassan R. Abdalla hashim A.H. Mohamed Sid A.S.A. and Jubair A.M. (2019) Framework Design for Secured Local Cloud Data Query Processing Analysis. IEEE Institute of Electrical and Electronics Engineers.

1. Y. F. Taguchi S. I. Sivasakthivel and T.& Fushimi C (2018) Design of low-temperature circulating fluidized bed coal gasifier model using ASPEN Plus®. Hachioji Japan: The 24th SCEJ Symposium on Fluidization and Particle Processing.

2. Sivasakthivel T. (2018) Advances in energy technologies. Tianjin University P.R. China: The PEIYANG forum for Young Scholars pp. 27–31.

1. Y. F. Taguchi S. I. Sivasakthivel and T.& Fushimi C (2018) Design of low-temperature circulating fluidized bed coal gasifier model using ASPEN Plus®. Hachioji Japan: The 24th SCEJ Symposium on Fluidization and Particle Processing.

2. J.K. S. P. R. and E. A. (2017) Experimental Parametric studies on austenitic SS316L using laser welding. Pahang Malaysia: 5th International Conference on the Advancement of Science and Technology..

1. Kumar, A., Awasthi, M.K., Dutt, N., Singla, Y.K. and Thangavel, S. (2025) Thermal Battery Management System for Hybrid and Electric Vehicles. Wiley‑Scrivener, eBook ISBN 978-1394289219
2. Kumar, A., Awasthi, M.K., Dutt, N., Singla, Y.K. and Thangavel, S. (2025) Thermal Battery Management System for Hybrid and Electric Vehicles. Wiley‑Scrivener, 1st edn., 416  Print ISBN 978‑1394289202.
3. Reddy, P.N., Thangavel, S. (2025). Optimum Eco-friendly Refrigerant Selection Using Multi-criteria Decision-Making Methods. In: Rath, K.C., Rocha, A., Mahapatra, S.S., Sood, A.K., Kumar, A. (eds) Engineering, Technology and Management. Information Systems Engineering and Management, vol 54. Springer, Cham. https://doi.org/10.1007/978-3-031-93654-8_8
4. Thamilarasi, V., Kumar, N., Kumar, P.G., Sivaraman, G. and [other authors] (2025) ‘QINN‑Based Approach to Detect Anomalies in High‑Dimensional Secure Data’, in Advancing Cyber Threat Detection Through Quantum and Edge Computing, IGI Global, pp. 293– DOI: 10.4018/978-8-3373-3551-3.ch010.
5. Mehta, A., Vasudev, H. and Jeyaprakash, N. (2025) ‘Oxide‑Based Composite Coatings for Gas Turbines to Combat Corrosion’, in Thermal Spray Coatings for High‑Temperature Conditions, edited by Prashar, G., Vasudev, H. and Thakur, L., CRC Press (Taylor & Francis), Chapter 7, pp. 135–147.
6. Durairaj, R.K., Jeyaprakash, N. and Che, H.Y. (2025) ‘Introduction’, in Tailoring of Engineering Material Properties through Laser Cladding: Metallurgical, Mechanical and Tribological Properties, CRC Press (Taylor & Francis), Chapter 1, pp. 1–24.
7. Jeyaprakash, N., Sundara Subramanian, K. and Che, H.Y. (2025) ‘Repair of engineering components through laser cladding’, in Tailoring of Engineering Material Properties through Laser Cladding: Metallurgical, Mechanical and Tribological Properties, CRC Press (Taylor & Francis), Chapter 4, pp. 78–102.
8. Prabu, G., Ibrahim Alnaser, N., Natarajan, J. and Che Hua Yang (2025) ‘Modification of ceramic material through laser cladding process’, in Tailoring of Engineering Material Properties through Laser Cladding, CRC Press (Taylor & Francis), Chapter 5.
9. Natarajan, J., Sundara Subramanian, K., Ibrahim Alnaser, N. and Che Hua Yang (2025) ‘Corrosion resistance improvement through laser cladding techniques’, in Tailoring of Engineering Material Properties through Laser Cladding, CRC Press (Taylor & Francis), Chapter 6
10. Prabu, G., Ibrahim Alnaser, N., Natarajan, J. and Che Hua Yang (2025) ‘Influence of laser cladding on mechanical properties’, in Tailoring of Engineering Material Properties through Laser Cladding, CRC Press (Taylor & Francis), Chapter 8.
11. Jeyaprakash, N., Sundara Subramanian, K. and Che Hua Yang (2025) ‘Effect of laser cladding on fatigue property’, in Tailoring of Engineering Material Properties through Laser Cladding, CRC Press (Taylor & Francis), Chapter 11. DOI: 10.1201/9781032693576‑
12. Singh, N., Raghuvanshi, R., Johri, A., Saxena, M., Kumar, A., Dutt, N., Awasthi, M.K., Sivasakthivel, Thangavel (2025) ‘Innovative technologies in heat exchangers for renewable energy systems’, in Heat Exchanger Technologies for Sustainable Renewable Energy Systems, CRC Press (Taylor & Francis), Chapter 1. eBook ISBN: 978‑
13. Ahmadizadeh, M., Heidari, M., Thangavel, S., Al‑Naamani, E., Khashehchi, M., Verma, V. and Kumar, A. (2024) ‘Technological advancements in sustainable and renewable solar energy systems’, in Highly Efficient Thermal Renewable Energy Systems: Design, Optimization and Applications, CRC Press (Taylor & Francis), Chapter 2, pp. 23–39. DOI: 10.1201/9781003472629‑ eBook ISBN: 978‑1003472629.
14. Hussain, S.J. & Thangavel, S. (2024) ‘Adoption, development, and application of robotic and nanofluid technology in sustainable healthcare: A comprehensive study’, in: Nanofluid Dynamics and Transport Phenomenon, 1st ed. CRC Press, pp. 27. [online]. eBook ISBN: 9781003527251
15. Ashfaq, F., Ahad, A., Hussain, M. and Madeira, F. (2024) ‘Transforming diabetes care: A review of IoT-based mobile health systems’, in IoT Technologies and Wearables for HealthCare, LNICST, Volume 530), Springer, pp. 14–32. DOI: 10.1007/978-3-031-71911-0_2.
16. Hussain, J., Thangavel, S. & Kumar, A. (2024) ‘Enhancing hospital management through robotics: Developing a custom API’, in Artificial intelligence and communication techniques in Industry 5.0, pp. 373-392. Available at: DOI: 10.1201/9781003494027-24
17. Patra, B.B., Aher, S.S., Kumar, A., Kumar, A., Kumar, A., Thangavel, S. and Gupta, A. (2024) ‘Role of lubrication in electrical systems: Challenges and emerging solutions’, in Ramesh, K. and Patel, M. (eds.) Performance characterization of lubricants. 1st edn. CRC Press. Available at: https://doi.org/10.1003535447.
18. Alazaidah, R., Al-Batah, M.S., Samara, G., Alluwaici, M., Safaqah, M.A., Aljaidi, M., Mohammad, S.I., Vasudevan, A. & Zhang, Y. (2025) ‘Prediction of landslides using data mining techniques’, Applied Mathematics and Information Sciences, 19(2), pp. 437-447. Available at: https://doi.org/10.18576/amis/190217
19. Kumar, A., Singla, Y.K., Biswas, P., Heidari, M. and Thangavel, S. (2024) ‘Resurrection structure: new generation of bio-inspired nanocomposites and laminates’, in Kumar, A., Singla, Y.K. and Maughan, M.R., eds. Fracture behavior of nanocomposites and reinforced laminate structures [online]. Cham: Springer, pp. 427–440. Available at: https://doi.org/10.1007/978-3-031-68694-8_17.
20. Heidari, M., Khashehchi, M., Thangavel, S., Rahmanivahid, P., Kumar, A., Singla, Y.K. (2024). Laminated Structures and Fracture Mechanics: A Comprehensive Study of Mode 1, Mode II, and Mixed Mode III Behavior. In: Kumar, A., Kumar Singla, Y., Maughan, M.R. (eds) Fracture Behavior of Nanocomposites and Reinforced Laminate Structures. Springer, Cham. https://doi.org/10.1007/978-3-031-68694-8_18
21. Khashehchi, M., Heidari, M., Thangavel, S., Rahmanivahid, P., Kumar, A., Singla, Y.K. (2024). Insights into Aerospace Structural Integrity: A Study on Fiber/Epoxy Composites Fracture. In: Kumar, A., Kumar Singla, Y., Maughan, M.R. (eds) Fracture Behavior of Nanocomposites and Reinforced Laminate Structures. Springer, Cham. https://doi.org/10.1007/978-3-031-68694-8_20
22. Heidari, M., Al Hasani, S. & Thangavel, S. & Kumar, A. (2024) ‘Challenges and perspectives of polymeric nanocomposites for biomedical applications’, in: Nanomanufacturing Techniques in Sustainable Healthcare Applications, 1st ed. CRC Press, pp. 24. [online]. eBook ISBN: 9781003470311.
23. Heidari, M., Thangavel, S. & Kumar, A. (2024) ‘Biomimetic nanocomposites for orthopedic applications’, in: Nanomanufacturing Techniques in Sustainable Healthcare Applications, 1st ed. CRC Press, pp. 18. [online]. eBook ISBN: 9781003470311.
24. Chhabra, P. and Babu, S.M. (2025) ‘An explorative study on the use of Artificial Intelligence in Oman high school education’, in Artificial Intelligence and Communication Techniques in Industry 5.0, CRC Press (Taylor & Francis), Chapter 4.
25. Chhabra, P. and Babu, M.S. (2025) ‘A study on the use of AI in academic curriculum and its role in the Industry 5.0 revolution’, in Artificial Intelligence and Communication Techniques in Industry 5.0, CRC Press (Taylor & Francis), Chapter 21, pp. 333–? eBook ISBN 978‑1003494027.

1. Khan, M.L., Hyder Kamran, Salleh, R., Rahmanivahid, P. and Fatima, W. (2024) ‘Managing career attitudes in the era of the 21st century’, in Human Perspectives of Industry 4.0 Organizations, CRC Press (Taylor & Francis), Chapter 12. DOI: 10.1201/9781032616810‑
2. Al-Manji, A.N.S.H., Thangavel, S., Kumar, A., and Heidari, M. (2024) A study on waste management practices in Oman and a way forward to a circular economy. In: Biodegradable waste processing for sustainable developments. 1st ed. Boca Raton: CRC Press, pp. 1–21. Available at: https://doi.org/10.1201/9781003502012.
3. Al-Manji, A.N.S.H., Thangavel, S., Kumar, A., and Heidari, M. (2024) A study on waste management practices in Oman and a way forward to a circular economy. In: Biodegradable waste processing for sustainable developments. 1st ed. Boca Raton: CRC Press, pp. 1–21. Available at: https://doi.org/10.1201/9781003502012.
4. Bhasney, S.M., Das, S.R., Prasad, A., Mahto, B., and Thangavel, S. (2024) Recycling of biopolymers. In: Biodegradable waste processing for sustainable developments. 1st ed. Boca Raton: CRC Press, pp. 1–27. Available at: https://doi.org/10.1201/9781003502012.
5. Kumar, A., Thangavel, S., Awasthi, M.K., Singh, V.P., and Dutt, N. (2024) Safety and environmental considerations in nanofluid-based systems. In: Nanofluids technology for thermal sciences and engineering. 1st ed. Boca Raton: CRC Press, pp. 1–24. Available at: https://doi.org/10.1201/9781003494454.
6. Heidari, M., Thangavel, S., Al Ghafri, K., and Kumar, A. (2024) Future trends and emerging research in nanofluids for aerospace applications. In: Nanofluids technology for thermal sciences and engineering. 1st ed. Boca Raton: CRC Press, pp. 1–20. Available at: https://doi.org/10.1201/9781003494454.
7. Ahmadizadeh, M., Heidari, M., Thangavel, S., Khashehchi, M., Rahmanivahid, P., Singh, V.P., and Kumar, A. (2024) Development of new materials for sustainable buildings. In: Kumar, A., Singh, V.P., and Thangavel, S., eds. Sustainable technologies for energy-efficient buildings. 1st ed. Boca Raton: CRC Press, pp. 1–19. Available at: https://doi.org/10.1201/9781003496656.
8. Khashehchi, M., Thangavel, S., Rahmanivahid, P., Heidari, M., and Kumar, A. (2024) Net zero energy buildings: design considerations, challenges, and applications. In: Meena, C.S., Kumar, A., Singh, V.P., and Ghosh, A., eds. Sustainable technologies for energy-efficient buildings. 1st ed. Boca Raton: CRC Press, pp. 1–20. Available at: https://doi.org/10.1201/9781003496656.
9. Thangavel, S., Kumar, A., and Heidari, M. (2024) Strategic and technical analysis of sustainable smart cities development in Oman. In: Meena, C.S., Kumar, A., Singh, V.P., and Ghosh, A., eds. Sustainable technologies for energy-efficient buildings. 1st ed. Boca Raton: CRC Press, pp. 1–29. Available at: https://doi.org/10.1201/9781003496656.
10. Heidari, M., Thangavel, S., Al Naamani, E., and Khashehchi, M. (2024) Emerging trends in smart green building technologies. In: Meena, C.S., Kumar, A., Singh, V.P., and Ghosh, A., eds. Sustainable technologies for energy-efficient buildings. 1st ed. Boca Raton: CRC Press, pp. 1–24. Available at: https://doi.org/10.1201/9781003496656.
11. Singh, V.P., Kumar, A., Meena, C.S., Thangavel, S., and Ghosh, A. (2024) Innovation in green building sector for sustainable future: fundamentals to advances. In: Meena, C.S., Kumar, A., Singh, V.P., and Ghosh, A., eds. Sustainable technologies for energy-efficient buildings. 1st ed. Boca Raton: CRC Press, pp. 1–29. Available at: https://doi.org/10.1201/9781003496656.
12. Chitt, M., Thangavel, S., Kumar, A., Singh, V.P., and Meena, C.S. (2024) Building performance prediction and optimization. In: Kumar, A., Singh, V.P., and Thangavel, S., eds. Sustainable technologies for energy-efficient buildings. 1st ed. Boca Raton: CRC Press, pp. 1–17. Available at: https://doi.org/10.1201/9781003496656.
13. Chitt, M., Thangavel, S., Kumar, A., Singh, V.P., and Meena, C.S. (2024) Building performance prediction and optimization. In: Kumar, A., Singh, V.P., and Thangavel, S., eds. Sustainable technologies for energy-efficient buildings. 1st ed. Boca Raton: CRC Press, pp. 1–17. Available at: https://doi.org/10.1201/9781003496656.
14. Rahmanivahid, P., Khashehchi, M., Thangavel, S., and Heidari, M. (2024) Social, economic, and environmental issues associated with sustainable buildings. In: Meena, C.S., Kumar, A., Singh, V.P., and Ghosh, A., eds. Sustainable technologies for energy-efficient buildings. 1st ed. Boca Raton: CRC Press, pp. 1–16. Available at: https://doi.org/10.1201/9781003496656.
15. Singh, V.P., Kumar, A., Meena, C.S., Thangavel, S. and Ghosh, A. (2024) ‘Innovation in green building sector for sustainable future: Fundamentals to advances’, in Sustainable Technologies for Energy Efficient Buildings, CRC Press (Taylor & Francis), Chapter 1. DOI: 10.1201/9781003496656‑ eBook ISBN: 978‑1003496656.
16. Heidari, M., et al. (2024) Navigating the landscape: cutting-edge biomedical manufacturing techniques. In: Kumar, A., Kumar, A., and Kumar, A., eds. Applications of biotribology in biomedical systems. Cham: Springer. Available at: https://doi.org/10.1007/978-3-031-58327-8_7.
17. Sivakumar, J. and Al Harthy, K. (2024) AI-powered teaching plan: present and post evaluation. In: Al Harrasi, N.H. and El Din, M.S. (eds) Utilizing AI for assessment, grading, and feedback in higher education. Hershey: IGI Global, pp. 162–188. Available at: https://doi.org/10.4018/979-8-3693-2145-4.ch007.
18. Khashehchi, M., Thangavel, S., Rahmanivahid, P., Milad Heidari, A., Moazzeni, T., Verma, V. and Kumar, A. (2024) ‘Solar desalination techniques: challenges and opportunities’, in Highly Efficient Thermal Renewable Energy Systems, CRC Press (Taylor & Francis), Chapter 19. DOI: 10.1201/9781003472629. eBook ISBN: 978‑1003472629
19. Khashehchi, M., Thangavel, S., Rahmanivahid, P., Milad Heidari, A. and Moazzeni, T. (2024) ‘Study and analysis of low‑level geothermal heat pumps in Oman’, in Highly Efficient Thermal Renewable Energy Systems, Taylor & Francis, Chapter 10.
20. Khani, K., Milad Heidari, A., Thangavel, S., Rahmanivahid, P. and Khashehchi, M. (2024) ‘Hydrogen production and storage’, in Highly Efficient Thermal Renewable Energy Systems, Taylor & Francis, Chapter 13.
21. Al Harthy, K. and Al Hasani, S. (2024) Strategies and considerations of implementing AI in higher education. In: Utilizing AI for assessment, grading, and feedback in higher education. Hershey: IGI Global, pp. 1–21. Available at: https://doi.org/10.4018/979-8-3693-2145-4.ch011.
22. Al Harthy, K. and Agarwal, A. (2024) ‘DeFi cybersecurity technical and nontechnical risks’, in Basly, S. (ed.) Decentralized Finance. Financial Innovation and Technology. Springer, Cham. Available at: https://doi.org/10.1007/978-3-031-49515-1_8
23. Agarwal, A., Al Harthy, K., and Zarine, R. (2023) Next-generation platforms for device monitoring, management, and monetization for healthcare. In: Soft computing techniques in connected healthcare systems. 1st ed. Boca Raton: CRC Press, pp. 1–30. Available at: https://doi.org/10.1201/9781003405368.

1. Sivasakthivel, T., Verma, V., Tarodiya, R., Meena, C.S., Singh, V.P. and Kumar, R. (2023) ‘Analysis of Optimum Operating Parameters for Ground Source Heat Pump System for Different Cases of Building Heating and Cooling Mode Operations’, in Thermal Energy Systems. 1st ed. CRC Press, pp. 36. eBook ISBN 9781003395768.
2. Sikarwar, S., Kumar, R., Yadav, A., Dutt, N., Verma, V., & Sivasakthivel, T. (2023). Lithium-Ion Battery Thermal Management Systems with Different Mediums and Techniques for Electric-Driven Vehicles. In Thermal Energy Systems (1st ed., pp. 12). CRC Press. eBook ISBN 9781003395768.

1. Malik, M.H., Ahmed, A.S. and Hosseini, A. (2021) ‘Computer Aided Collaborative Learning: Challenges and Opportunities’, in Digitalization of Higher Education using Cloud Computing. 1st ed. Chapman and Hall/CRC, pp. 12. eBook ISBN 9781003203070.

1. Hussain, Dr. S., Khan, Samiullah, Hasan, Raza, and Hussain, S. Asif. “Design and Implementation of Animal Activity Monitoring System Using TI Sensor Tag.” In Cognitive Informatics and Soft Computing, pp. 167–175. Advances in Intelligent Systems and Computing, January 2020. https://doi.org/10.1007/978-981-15-1451-7_18.
2. El-Hassan, N.H., Thulasiraman, N. and Almurib, H.A.F. (2019) ‘Phase change memory: electrical circuit modelling, nanocrossbar performance analysis and applications’, in VLSI and Post-CMOS Electronics, Volume 2: Devices, Circuits and Interconnects, Chapter 13. Wiley, pp. 1122-1130. eBook ISBN 978-625-367-323-9.

1. Kumar, A., Awasthi, M.K., Dutt, N., Singla, Y.K. and Thangavel, S., eds. (2025) Thermal Battery Management System for Hybrid and Electric Vehicles. 1st edn. [online]. Wiley-Scrivener. Available at: ISBN 9781394289202

2. Kumar, A., Thangavel, S. and Dwivedi, S., eds. (2025) Green Hydrogen Production, Storage, Transportation and Applications. 1st edn. [online]. Routledge. Available at: ISBN 9781032870434.

3. Jeyaprakash, N., Prabu, G. and Yang, C.-H., eds. (2025) Tailoring of Engineering Material Properties through Laser Cladding: Metallurgical, Mechanical and Tribological Properties. 1st edn. [online]. CRC Press. Available at: DOI 10.1201/9781032693576

4. Awasthi, M.K., Kumar, A., Dutt, N. and Thangavel, S., eds. (2025) Heat exchanger technologies for sustainable renewable energy systems. 1st edn. [online]. CRC Press. Available at: ISBN 9781032878508.

5. Vijay, A., (2025) Digital and Mobile Forensics. [online]. Packt (or relevant publisher). Available at: ISBN 9781032693576.

6. Sivakumar, J., (2025) Data Visualization and Interpretation. 1st edn. [online]. SK Research Group of Companies. Available at: ISBN 9789364929837.

1.Khan, M.L., Kamran, H., Salleh, R., Rahmanivahid, P. and Fatima, W. (2024) Managing Career Attitudes in the Era of the 21st Century Human Perspectives of Industry 4.0 Organizations: Reviewing Sustainable Performance [online]. CRC Press.

2.Verma, V., Thangavel, S., Dutt, N., Kumar, A. and Weerasinghe, R., eds. (2024) Highly efficient thermal renewable energy systems: design, optimization and applications. 1st ed. Boca Raton: CRC Press. Available at: https://doi.org/10.1201/9781003472629.